Dialogic 4000 Series SU4.1 Instrukcja Użytkownika Pobierz pdf (Strona 50)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

Reply-To

format:

You can configure this parameter only if you selected e-phone as

Peer type in the Edit SIP Peer Configuration window.

Enter the format that may be necessary for the e-phone server to

handle the call. Normally, this is necessary to omit the 0 (zero) for

external calls and to manipulate the address so the e-phone server is

able to call back.

Alive check:

If you select this option, the failover procedure is expedited, because

Diva SIPcontrol does not wait for a call time-out if a peer does not

respond.

To achieve this, Diva SIPcontrol sends "pings" periodically to the peer

via OPTIONS requests. If the peer does not send a valid answer, it will

be treated as "inactive" and no calls will be routed to this peer until

the peer responds to the "pings.". In this case, Diva SIPcontrol will

automatically direct calls to this peer again.

Disconnect

tone support:

If the remote side is able to provide inband tones or signals on

disconnect, check here to play those inband tones to the SIP peer

instead of terminating the SIP call immediately. The SIP call ends

either by the client sending a BYE or after the Disconnect Timer of the

PSTN interface ends (normally with "Normal call clearing").

Normally this option is set only if the peer is a human talker.

Support MWI

(Message

waiting)

If enabled (the default), the SIP peer is able to receive Message

Waiting Indication (MWI) requests via a SIP NOTIFY message from

SIPcontrol.

If disabled, the destination for MWI requests is chosen from the

routing table. If no alternate destinations have been configured, the

request is declined.

Cause code

mapping

inbound:

Select the cause code mapping for calls coming from this SIP peer

that you configured under Cause Code Maps.

Cause code

mapping

outbound:

Select the cause code mapping for calls to this SIP peer that you

configured under Cause Code Maps.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 225 226

Komentarze do niniejszej Instrukcji

Brak uwag

Dialogic 4000 Series SU4.1 Instrukcja Użytkownika Strona 50

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery Dialogic 4000 Series SU4.1