Dialogic 4000 Series SU4.1 Instrukcja Użytkownika Pobierz pdf (Strona 186)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

178

 A dummy SIP peer that is used for rejecting PSTN calls made to the same

extensions as the FXS ATA (extensions 2201 and 2202.

17.

Once you have created the SIP Peers, you need to disable the dummy SIP peer, which

is the fourth one. To do this, access the SIP Peers section of the main SIP

Configuration screen, and uncheck the Enabled parameter for this peer.

The SIP Peers section of the main configuration screen should now look like this:

18.

Create the following routes in the order specified:

 Route to block numbers from the PSTN that have the same extension as the

ATA

 Route from the PSTN to the Lync Server

 Route for call transfers in a Lync Server environment

 Two routes from the Lync Server to the FXS ATA extensions

 Route from the Lync Server to the PSTN

 Route from FXS ATA to the Lync Server

In this scenario, the order of the routes is important because of the conditions used.

For instructions on creating routes, see Creating the Routes for This Scenario.

Creating the SIP Peers for This Scenario

Create the SIP Peers in this order:

Create the first SIP peer for the Lync Server. To do this, open the SIP Peers section,

click Add, and enter the following parameters:

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 225 226

Brak uwag

Dialogic 4000 Series SU4.1 Instrukcja Użytkownika Strona 186